Plate Heat Exchanger for Marine& Power Plant
Product Description
Each unit consists of a series of grooved plates that are individually gasketed and pressed tightly together by compression bolts within a frame. Fluids enter and exit the PHE through portholes in one or both ends of the frame. Within the unit, the fluid to be heated or cooled flows down one side of each plate,
While the heating or cooling medium flows in the opposite direction across the other side. The huge temperature difference created by these opposite flows allows maximum heat transfer efficiency for closest possible approach temperature.
Features
1, High Efficiency with Life Cycle Support
2, High Heat Transfer Rates
3, Modularity For Flexibility
4, Compact Design
5, Self-Cleaning Action
6, Easy to maintance
Product Parameters
Component Material
Heat-exchange plate: SUS304, SUS316L, SMO254, titanium, nickel, Hastelloy alloy
Gasket seal: NBR, H-NBR, EPDM, food pad, fluorine rubber, silicon rubber
Frame: Carbon steel, stainless steel, coated stainless steel
Clamping bolt: Galvanized carbon steel, stainless steel
Interface: Rubber, carbon steel, stainless steel
Guide bar: Galvanized carbon steel, stainless steel
| Material Description |
Code |
Applicable Temperature ( degree centigrade ) |
Anti-corrosive Performance and Applicable Occasions |
| NBR |
N |
-20~110 |
Hot air, water, non-polar oil, mineral oil, lubricant and silicone oil, etc. |
| EPDM |
E |
-50~150 |
Vapor, polar chemical medium, alcohol, weak acid, weak alkali and oxidizing agent, etc. |
| CR |
C |
-40~100 |
Ammonia, mineral oil and lubricant, etc. |
| Fluorine Rubber |
F |
0~180 |
Inorganic acid, alkali, mineral oil and Haloalkane, etc. |
| Silicon Rubber |
Q |
-65~230 |
Resistant to cold current and dry hot |
Company Profile
){kind=link}
){kind=link}